Kérdése van? Hívjon minket! +36704033327
Aquastic (Hajdu Gyártmány) AQ ECO 150 ErP 150 liter electric water heater. Trendy hot water storage tank, with titanium fire enamel coated tank and magnesium active anode. Can be mounted vertically on the wall.
The Hajdu Aquastic (Hajdu Gyártmány) AQ ECO ErP Electric Water Heater is a perfect solution for supplying domestic hot water to family homes and smaller businesses!The tank of the water heater is specially fire enameled, which ensures hygiene and a long service life.The corrosion protection is provided with active anode protection.The hot water comfort is better than with flow-through versions, as it is suitable for supplying multiple hot water points at the same time.The control surface is simple (knob design), where we can adjust the water temperature.Hajdu Zrt. provides a 5-year warranty on the tank and a 2-year warranty on other components.Main features:
The closed-system hot water tank is suitable for supplying hot water to multiple water points in households and institutions.The hot water obtained is suitable for both bathing and cooking purposes, however, given that hot water has a higher metal-dissolving capacity, it is recommended to use cold water for both cooking and drinking, and to heat it up if hot water is needed.Water is of drinking water quality if it meets the limit values specified in Government Decree 201/2001. (X.25.).The temperature of the water in the tank can be adjusted according to your needs (max. 65 or 80 ºC). Once the set temperature is reached, the temperature controller automatically switches off the heating. This means that hot water can be obtained from the tank for a long time.The polyurethane thermal insulation surrounding the inner tank prevents the water from cooling down quickly, so that hot water can be obtained from the tank for a long time. The tank is designed so that the hot water flows out without mixing.The inner tank is made of corrosion-protected steel sheet.In addition to the special fire-enamel coating, the steel sheet is also protected against corrosion by an active anode.The fire-enamelled design ensures a long service life even in aggressive (soft) waters.The installation of the hot water tank and its connection to the water and electrical network must be carried out by a specialist in accordance with the regulations of IEC 60364 / HD 60364.Steel pipes, plastic pipes and red copper pipes or flexible pipe connections suitable for a nominal water pressure of 0.6 MPa can be used for the cold and hot water pipes.The use of insulating spacers is mandatory for connecting red copper water pipes to the network!A layer of limescale on the radiator increases the likelihood of radiator failure, therefore it is recommended to clean it every two years.
Manufacturer AquasticModel ID AQ ECO 150 ErPDomestic hot water energy classification CNominal load profile LArticle number 2112113540Water heating efficiency % 37Annual electricity consumption kWh 2732Other load profile -Efficiency for other load profile % -Annual energy consumption for other load profile kWh -Thermostatic set temperature °C 56Sound power level indoor dB 15Only Off-peak operation possible -Special precautions to be taken during assembly, installation or maintenance (if applicable) Children must only operate the appliance under supervision.Any operation other than those specified in the user manual must be carried out by a qualified technician.The appliance must be disconnected from the power supply before any repair or maintenance is carried out.Water flowing out at temperatures above 50 °C can cause serious burns.The tank must be filled with water before switching on the heating.The device must not be connected with a hose! The use of insulating spacers is mandatory for connecting to a copper water pipe network!It is forbidden to put the device under a pressure higher than the operating pressure specified in the manual and is life-threatening!It is forbidden to install a water pipe fitting between the safety valve and the device and to drain water in an invisible way!The pressure reducing valve and the safety valve may only be installed and operated in a frost-free environment.The hot water tank must not be operated without protective earthing!Technical dataDescription Sealed hot water tankPosition Wall, VerticalVolume L 150Voltage V 230~Heating power W 1800Current consumption 10 AHeating time from 15 ºC to 65 ºC h 5.3Standby energy consumptionAt 65 ºC kWh/24h 1.92Water connection G1/2"Weight empty kg 38.5Nominal operating pressure MPa 0.6Maximum opening pressure of safety valve MPa 0.7Integrated safety control elements Integrated temperature controller/limiter, combined safety valveOther protection active anodic corrosion protectionApplicable touch protection class IDimensions:h (height) mm 1172d (diameter) mm 496a mm 950mm mm 930C mm 509e mm 89