The price does not include the cost of installation
3D AIRFLOW
The air flow can be adjusted both vertically and horizontally using motors, which guarantees a uniform temperature in your home.
I-Feel function
The thermometer built into the air conditioner's remote control detects the temperature of the air in its surroundings and transmits it to the indoor unit. With this function, the air conditioner adjusts the temperature and fan speed to the location of the remote control (in automatic fan speed mode). The I-Feel function thus maximizes the feeling of comfort and enables precise control.
8°C tempering
The air conditioner maintains the indoor temperature at a stable 8°C, preventing the water systems from freezing during the winter, in the case of a property that has not been used for a long time.
G10 inverter technology
The essence of the operation of the inverter air conditioner is that the compressor does not turn on and off, its speed is always adjusted to the appropriate cooling or heating heat load, i.e. the heat demand. G10 inverter technology is a unique development of the Gree factory, with which the compressor speed can be reduced to a frequency of up to 1 Hz, which allows even higher energy efficiency to be achieved.
Intelligent defrost
At low ambient temperatures, moisture in the air can freeze on the heat exchanger plates, and over time it begins to reduce the air flow required for the heating cycle. The control panel continuously monitors the operating data, and then starts an intelligent defrost at specified intervals based on the values of the temperature sensors. With this function, the air conditioner automatically prevents the outdoor unit from completely freezing, thereby protecting the various components and increasing the efficiency of the heating.
Energy saving mode
When the function is turned on, the set temperature in cooling mode is changed to a fixed value and the fan spins at a low speed, thus saving energy.
H-tariff can be requested
The H electricity tariff was created so that various environmentally friendly, heat and renewable energy sources can operate at a discounted price throughout an entire heating season. This so-called “H tariff”, which can also be requested for heat pumps and split air conditioners, is available from October 15 to April 15, and the price of which can never be higher than the current controlled price, as specified in the decree. One of the most important conditions for requesting it is that the air conditioner you want to install must have a minimum SCOP value of 3.4. All GREE residential air conditioners meet this condition, so you can get a quick, comfortable and cost-effective heating solution for your home.
Compressor crankcase and drip tray heating
At low ambient temperatures, the compressor must be kept warm for the heating cycle to run properly and to preserve the compressor's lifespan. Heating the drip tray prevents the condensate from accumulating and freezing in the outdoor unit. In addition to cooling, the unit is also suitable for continuous heating mode in winter.
Automatic mode
The unit selects an operating mode depending on the internal temperature.
WI-FI CONTROL
GREE devices with Wi-Fi function can be controlled from anywhere in the world via the Internet using a smartphone. To use this function, the GREE+ application is required, which provides a brand new experience in intelligent control, whether it is turning on and off, setting the temperature or even timing.
You can control your air conditioner from anywhere in the world from your mobile phone. The Gree+ application can only be used for Gree air conditioners equipped with a Wi-Fi module.
