Solar inverter for water heating ECO Solar Boost MPPT-3000 3.5kW PRO

Product Description
The ECO Solar Boost MPPT-3000 PRO inverter allows the direct use of photovoltaic panel systems to operate resistance heating devices such as electric boilers, radiators, heating mats, water heaters, etc.
The system is simple, only the right number (4-9 pcs.) of photovoltaic panels with an operating voltage of about 35 V or the right number of panels with different voltages and energies, e.g. electric boilers, underfloor heating, etc., are required to connect energy-consuming devices.
The inverter is equipped with an LCD display that informs the user about the parameters of the PV system, such as: the voltage of the PV system, the electricity produced by the PV panels, the output power, the total energy produced on the current day, the total energy produced on the previous day, the total energy produced (measured since the first switch-on).
In addition, the display shows current events and detected irregularities in the form of text messages.
The direct current produced by the panels, which cannot be fed directly to the heating devices, is converted into alternating current in the inverter, which can be used to power the heating devices.
The maximum power of the system is 3.5 kW, the inverter has a priority output number of "1" and a dependent output number of "2".
The device allows the connection of two heating devices, for example two boilers, one of which heats first, and the other when the thermostat of the first one no longer receives power from the converter.
Thanks to the implemented MPPT function, the inverter automatically adapts to the power of the heating device and sets its operating point so that the energy received from the PV panel system is maximum.
ATTENTION! Heating devices with an electronic controller can only be powered from output 1.
Technical parameters:
Input voltage [VDC]: (VDC): 120-350 (VDC).
Output voltage [VAC]: 120-350 (VAC).
Maximum power: 3.5 kW.
PV panel connection: series or series-parallel.
Output voltage waveform: modified sine wave.
VAC output 1: priority.
VAC output 2: dependent.
Overload, undervoltage, overvoltage and thermal protection.
Operating temperature: -25 °C ~ +55 °C.
Efficiency: >96%.
Cooling: active.
Power connector: MC4 connector.
230 V output socket: 2 x E (single pin) - more information here.
Material: aluminum.
Degree of protection (IP): IP21.
Solar panels and boiler not included.